Sun Lizard Solar Climate Control -- Specifications

Solar Heat Collector

This specially designed solar glass, coated metal and insulated box, creates heat to over 100 degrees Celsius.  Air circulates through the angled baffles picking up this heat and the returning air is up to 50 degrees Celsius.  There may be one or two of these in your system.

Width: 1520mm
Depth: 1220mm
Height: 120mm
Weight: 60kg

PV Panel

Generates electricity from the sun hitting the silicone crystal cells.  They typically last around 25-30 years.

Power: 30 Watts
Voltage: 12 Volts
Current: 1.78Amps
Width: 592mm
Depth: 502mm
Height: 50mm

Air flow control box

Controls the direction air travels.  Through the collector and back to the house in heating mode, and out to the exhaust flue in cooling mode.

Width: 500mm
Depth: 350mm
Height: 200mm

Fan box

Contains 4 powerful and reliable fans with smart design features to give maximum air flow and pressure.  The fans are powered by the PV panel.

Fans: 4 x 6.8 Watt Fans
Width: 500mm
Depth: 300mm
Height: 200mm
Air Flow Rate: 6m3/min
Inlet & Outlet Dia: 150mm

Electronic control system

User friendly control panel sits in front of a sophisticated electronic control system to manage the Sun Lizards operation.

Wall mount switch & Cable
Functions: On/off, High, Low
240/12V plug pack

Exhaust Flue or Adaptor

To get rid of unwanted hot air in summer. The Exhaust Flue is suitable for roof cavities while the Exhaust Adaptor is suitable for roofs with no cavities.

Ceiling Diffuser

Inlet or return air always goes through the ceiling diffuser and out to the Sun Lizard

Colours: White Only
Diameter: 150mm
Overall Width: 270mm

Insulated Flex Duct

Insulated ducting for moving the air from the building, to the Sun Lizard and back again

Diameter: 150mm
Length: 6m
R-Value: 1

Y Branch

To allow the second solar collector to be connected to the first solar heat collector

Inlet opening: 150mm Diameter
Outlet Openings 150mm Diameter

Dektites

Metal Roofs

Tiled Roofs

To allow for flashing of metal pipe so to protect the roof from water or moisture.

Pipe: 110mm – 170mm Diameter
Base: 284mm x 284mm (Metal) 600mm x 450mm (Tiled)
Colour: Black

Gal Pipe

For external roof ducting, connecting the Sun Lizard to the inlet and outlet vents.

Pipe: 150mm Diameter

Metal Bends
  

For external roof ducting, connecting the Sun Lizard to the inlet and outlet vents.

Pipe: 150mm Diameter

Allow cool, filtered air to come into the building during summer and can be sealed off in winter. Comes with filter, floor register and floor boot. Floor register comes in various colours.

Width: 300mm
Depth: 100mm
Height: 135mm

2NSCC Kit

(For Dual Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings with ceiling cavity & pitched roofs facing:
- South or
- East and West (Collector on roof)

2 x NS Roof Frames

2EWCC Kit

(For Dual Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings with ceiling cavity & pitched roofs facing:
- East only or
- West only

2 x EW Roof Frames
2 x NS Roof Frames

2NSNC Kit

(For Dual Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings with no a ceiling cavity & a roof that is:
-Flat
- South Facing
- North Facing
- East & West Facing with a collector on each roof

1 x Exhaust Adaptor
1 x Dektite removed
2 x NS Roof frames
(External insulated roof duct not included)

2EWNC Kit

(For Dual Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings without a ceiling cavity & a roofs that is:
- East Facing only
- West Facing only

1 x Exhaust Adaptor
1 x Dektite removed
2 x EW Roof frames
2 x NS Roof frames
(External insulated roof duct not included)

1NSCC

(For Single Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings with ceiling cavity & pitched roofs facing:
- South

1 x NS Roof Frames

1EWCC

(For Single Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings with ceiling cavity & pitched roofs facing:
- East only or
- West only

1 x EW Roof Frames
1 x NS Roof Frames
(Wall duct not incl.)

1NSNC

(For Single Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings with no a ceiling cavity & a roof that is:
-Flat
- South Facing
- North Facing

1 x Exhaust Adaptor
1 x Dektite removed
1 x NS Roof frames
(Wall duct and external insulated roof duct not incl.)

1EWNC

(For Single Collector System Only)

To tilt Heat Collectors at optimum solar angle. Suitable for buildings without a ceiling cavity & a roofs that is:
- East Facing only
- West Facing only

1 x Exhaust Adaptor
1 x Dektite removed
1 x EW Roof frames
1 x NS Roof frames
(Wall duct and external insulated roof duct not incl.)

Heating Duct and Vent

The heated air is returned to the building through this vent.  It will vary from building to building depending on your specific requirements.

Built by your local installer, plumber or builder.
Click here for further information

External Roof Duct

Suited for roofs with no roof cavity and where ducting is exposed. Comes with insulation and colorbond top hat for weatherproofing.

Built by your local installer, plumber or builder.
Click here for further information

PV Frame

To tilt the PV panel to the correct angle for maximum solar gain.

Adjustable at various degrees and heights.